Set up your Xbox 360 E console

Step 1: Unbox the console

An Xbox 360 E game system typically includes:

1. Console
2. A/V cable (3.5mm composite)
3. Power supply
4. Power cord
5. Wireless controller
6. 2 AA batteries
7. User manual
8. Wired headset (varies by console package)

Step 2: Remove the protective tape

Step 3: Position the console

Make sure that the location for your console is as follows:

• Stable
• Well-ventilated, relatively cool, and away from direct heat sources
• Uncluttered. Do not put other objects on, under, or right next to the console

You can position the console vertically or horizontally.

1. Plug in the power supply.
2. Plug the power cord into the power supply.
3. Plug the power cord into an electrical outlet.

The Xbox 360 E console system includes a Composite Audio/Visual cable. You can use this cable to connect the console to a standard television or monitor. Here's how:

Notes

• This Composite Audio/Visual cable does not support high definition (HD) display.
• If you have a HDTV and want to check the instructions for using an HDMI cable, see Connect your Xbox 360 console to a TV.

1. Connect the small 3.5mm connector to the 3.5mm jack on the back of the console.
2. Locate the A/V ports on your TV or monitor. Connect the color-coded connectors on the composite A/V cable to the corresponding ports on the TV as follows:
   • Yellow = composite video
   • Red = right-channel analog audio
   • White = left-channel analog audio

Note Monaural (mono) TVs have only one audio port. Connect either the red or white connector to the TV.

3. Turn on the TV and console.

   When you turn on the TV and console, you should see the Xbox Dashboard on your display:

If you don't see the Xbox Dashboard, you might need to change the video input setting. To change the video input setting, refer to your TV or Entertainment Center manual for instructions.

To improve the video display, you can change the default settings.

Connect a wireless controller

1. Turn on the console.
2. Insert the AA batteries into the controller.
3. Turn on your controller by pressing and holding the center Xbox Guide button, until the controller turns on.

If the controller does not turn on, check the batteries. If you’re using a rechargeable controller, make sure that it is charged.

4. Press and release the connect button on the console.

5. Within 20 seconds, press and release the connect button on the controller.

Notes

• When the lights surrounding the power button on the console stop flashing, the controller is connected.
• You can connect up to four controllers to a console.
• Each connected controller is assigned to one of four positions. Each position corresponds to a lighted section around the controller’s Xbox Guide button.

Connect a wired controller

If you have a wired controller, see Connect a game controller.

The first time that you start your console, you’re prompted to:

• Select your language.
• Create a profile.
• Set up a network connection (optional). For information about how to connect to Xbox Live, see Wired connection or Wireless connection.

Follow the on-screen instructions to complete these steps.

Now, insert a game disc and you’re ready to start playing!

Tip Watch Xbox 101 videos to learn how to get the most out of your Xbox 360 console.