Help:시각편집기/사용자 가이드

This page is a translated version of the page Help:VisualEditor/User guide and the translation is 44% complete.

---

참고: 이 문서를 편집하면, CC0에 따라 당신의 기여를 배포하는 데 동의한 것으로 간주됩니다. 자세한 내용은 퍼블릭 도메인 도움말 문서를 보십시오. 편집 · 번역

---

• 홈페이지
• 의견 남기기
• 현황 보고

---

소개

---

• 시각편집기를 개발하는 이유?
• VisualEditor rollouts
• 자주 묻는 질문 목록
• Media Q&A (in English)
• 시각편집기 사용법
  • 키보드 단축키
• VisualEditor roadmap
• User testing reports
• Design portal
  • References and citations
  • Tables

---

도입 준비를 돕기

---

• 도움말 문서를 갱신하기
• 틀데이터(TemplateData)를 추가하기
  • 틀데이터 설명서
• 새로운 사용자를 돕기
• 번역관리
• 문서 번역 및 지역화
  • 스크린샷을 찍는 방법

---

편집 · 번역

If you would like to try VisualEditor without editing an article, here is a page where you can freely test it. You don't need an account to use VisualEditor on that page.

시각편집기 열기

시각편집기로 문서를 편집하려면, 문서 최상단의 "Edit" 탭을 클릭하세요. 편집 창을 여는 것은 몇 초 가량 걸릴 수 있으며, 문서가 매우 길 경우에는 더 오랜 시간이 걸릴 수 있습니다. "Edit source" 탭을 클릭하면 기존의 위키문법 소스 편집기가 열립니다.
또한 각 문단의 "edit" 링크를 클릭하여 시각편집기를 열 수 있습니다.

시작하기: 시각편집기 툴바

시각편집기 툴바는 시각편집기로 편집을 시작할 때 화면 최상단에 나타납니다. 툴바에는 친숙한 아이콘 여러 개를 포함하고 있습니다:
	당신이 한 행동을 취소하거나 다시 실행합니다.
	문단 제목 선택 메뉴는 문단 제목의 단계를 변경할 수 있도록 합니다. 표준 문단 제목 서식은 "문단 제목"으로 설정되어 있습니다. The normal format for text is "Paragraph".
	Formatting: Clicking the "A" opens a menu. For any item to have an effect, you must have first selected (highlighted) some text. The "Bold" item (B) bolds the selected text. The "Italic" item (I) italicizes the selected text. The "Superscript" item (x2) causes the selected text to appear smaller than surrounding text and to be slightly higher than the surrounding text. The "Subscript" item (x2) causes the selected text to appear smaller than surrounding text and slightly lower than the surrounding text. The "Strikethrough" item (S) adds a solid bar through the selected text. The "Computer code" item (a set of curly brackets: {}) changes the font of the selected text to a monospaced font, which sets it apart from surrounding (proportionally spaced) text. The "Underline" item (U) adds a solid line beneath the selected text. The "Language" item (Aあ) allows you to label the language (for example, Japanese) and direction (for example, right-to-left) of the selected text. The final item (" ⃠ "), called "Clear styling", removes all character formatting from the selected text, including links
	Linking tool: The chain is the linking tool. Clicking on it (usually after selecting some text) opens the link dialog.
	Cite menu: The "Cite" menu is used to add inline citations (also called "footnotes" or "references"). All projects have access to "Basic" reference formatting and the ability to "Re-use" citations, using this menu. This menu also gives you quick access to local citation templates, if these are enabled on your wiki. (Instructions for adding local citation templates to the Cite menu at a specific wiki are available at VisualEditor/Citation tool.)
	Lists & indentation: The first two items allow you to format text as either a "Bullet list" or a "Numbered list". The last two items allow you to decrease or increase the indentation level of list items.
	미디어, 주석 & 틀 도구: 각 아이콘은 대화창을 열 것입니다: "Media" 아이콘(산 모양)을 클릭하면 미디어 대화창이 열립니다. The "Gallery" icon (a set of photos) allows you to insert a gallery to the page. The "Template" icon (a puzzle piece) allows you to edit templates. The "Comment" item (a speech balloon) allows you to insert comments that are not visible to readers; these comments can be seen only when in edit mode. The "Formula" icon (Σ) opens the formula inserter dialog. The "References list" icon (three books) opens a dialog in which you can specify where will references be displayed to the reader. Usually this only needs to be done once on every page. The "Hieroglyphs" icon (an ankh symbol - ☥) allows you to enter the hieroglyphics inserter. (See below.) The "Special character" icon (Ω) allows you to insert some special characters. (See immediately below.)
	Special character insertion: The "Special character" icon on the "Insert" menu, when clicked, displays a dialog showing many special characters. By clicking on a specific character, you place it into the text. These special characters include some standard symbols, accents, and mathematical symbols. (This list may be customized locally. See VisualEditor/Special characters for instructions.)
	The Page options menu is to the left of the Save page button. On this menu there are options to adjust page settings, such as whether the page is a redirect, or how it is indexed; to add, edit, or delete categories; and to see, using the "Language" item, the list of articles on the same subject that are in other languages. You can also switch (one-way only) from VisualEditor to the classic wikitext source editor without losing the editing work you've done.

편집 저장하기

편집을 마쳤다면 툴바에 있는 녹색의 "Save page" 버튼을 클릭하십시오. 녹색 버튼은 문서 내용에 아무런 변화가 없다면 클릭이 불가능합니다. To cancel all your editing changes, just close your browser window.
Pressing the green "Save page" button opens a dialog. You can then enter a brief summary of your actions, mark your edit as minor, and add the page to your Watchlist. The box for the summary is the equivalent of the Summary (?): field in the wikitext editor. You can also review your changes using the "Review your changes" button to be sure they will work as intended before saving your changes. This is similar to the "Show changes" button in the wikitext editor. The "Cancel" button returns you to the page you were editing. You can save all of your changes later.

링크 편집하기

	링크는 툴바에 있는 고리 모양의 "Link" 아이콘을 통해 추가하거나 ⌃ Ctrl+K (Mac의 경우 ⌘ Cmd+K) 단축키를 통해 추가할 수 있습니다. If you select (highlight) text and then press the "Link" button, a link will be inserted using that text. For single-word links it's enough to just do it while the caret is on that word.
	버튼을 누르든 단축키를 사용하든, 내부 링크(위키백과의 다른 문서를 가리킴) 대상을 입력할 수 있는 대화창이 뜰 것입니다. 시각편집기에서는 내부 링크의 경우 입력을 시작하면 일치하는 문서를 찾도록 도와 줄 것입니다. VisualEditor will try to help with internal links by looking for likely matches as you begin to type.
	Once you have entered or selected the link, you complete the linking process by pressing ↵ Enter, pressing the "Done" button, or just clicking outside of the box. Your link will immediately appear on the VisualEditor page, but it will not be saved until you save the entire page.
	To link to a web page on another website, the process is the similar: you enter a URL in the box, and it will be added as an "External link".
	External links without labels look like this: [1]. You can add these by placing your cursor away from any word (e.g., after a space). Open the link tool by clicking on the button or pressing the shortcut keys. Type the URL in the box, and click the "Done" button to insert the link.
	기존에 있는 링크를 변경하거나 제거하려면, 문자열에 있는 링크를 클릭하고, 옆에 뜨는 "Link" 아이콘을 클릭하십시오. 툴바의 같은 아이콘을 클릭하거나 ⌃ Ctrl+K 단축키를 사용할 수도 있습니다. In the dialog, you can then change where the link goes. You can also remove the link altogether by pressing the "Remove" button in the lower left corner of the dialog. You can also open the link's target in another window by clicking on the "Open" button. (You might want do this to check if an external link is valid.)

주석 편집하기

기존에 있는 주석 편집하기
	기존에 있는 주석을 편집하려면, 주석을 클릭하고, 툴바나 클릭한 주석 옆에 뜨는 책갈피 모양의 "Basic" 아이콘을 클릭하십시오.
	주석 아이콘을 클릭하면, 주석의 내용을 편집할 수 있는 작은 편집기를 포함하고 있는 대화창이 열립니다. Many wikis use templates to format references. If a template is used in your reference, then all the text in the template will be highlighted when you click on the reference information. If a template was used and you've clicked on information in that template, then the Template icon (puzzle piece) will appear. Click on that to edit the content of the template, in the template mini-editor dialog.
	If, instead of the "Basic" icon (bookmark), what appears when you click on a reference is an icon for a standard template for citations, clicking on that icon will take you directly to the template mini-editor dialog.
	Inside the template mini-editor, you can add or remove types of information or change current content. Only fields (template parameters) that have content are supposed to be shown initially. To add fields, click on "Add more information" at the bottom of the mini-editor.
	Click on "Apply changes" when you're done.
이미 있는 주석을 재사용하기
	당신이 출처를 제시하고자 할 때 해당되는 주석이 이미 있다면, 이미 있는 주석을 재활용할 수 있습니다. 기존에 있는 주석을 재활용하려면, 문서에 주석을 추가하고자 하는 곳에 커서를 두고, 툴바에 있는 책갈피 모양의 "주석" 아이콘을 클릭하십시오.
	In the Reference dialog, look at the list for the reference you want to reuse, and select it. If there are many references, you can use the search box (labeled "What do you want to reference?") to list only those references that include certain text.
새 주석 추가하기
	To add a citation using the "Cite" menu, place your cursor where you want to add it in the text. Then select the appropriate citation type in the menu.
Using the "Basic" citation
	주석 편집기에서, 참고 문헌 내용을 추가, 편집하고 모양을 바꿀 수 있습니다. You can make the reference belong to a given group, although normally this is left blank. (This option is used to display groups of references with the "References list" tool.)
	새 주석을 추가하고 주석에 틀을 추가하려면, 주석 편집기의 툴바에서 퍼즐 모양의 틀 아이콘을 클릭하십시오.
	Then, look for the template you want to use, add it and edit it as you would any other template. (See the Editing templates section, below, if you need more information about templates.) 주석 편집기로 돌아가려면 "Apply changes"을 클릭하시고, 문서 편집창으로 돌아가려면 "Apply changes"을 한번 더 클릭하십시오.
	문서에 주석 목록이 없는 상황이라면(예를 들어 문서에 첫 번째 주석을 추가한 경우), 주석 내용을 표시하려면 주석 목록을 추가해야 합니다. Place the cursor where you want to display the references list (usually at the bottom of the page), open the "Insert" menu and click the "References list" icon (three books).
	If you are using several groups of references, which is relatively rare, you can specify the group in this dialog. Only the references that belong to that group will be displayed here. The final step in the References list dialog is to click "Insert".
Using standard cite templates
	Your local wiki may have added extra citation templates to this menu. This offers quick access to the most-used citation templates. (Instructions for adding extra citation templates to your local wiki are available at VisualEditor/Citation tool.)
	Clicking on a template icon such as "Cite book" will take you into the template mini-editor for that template. Important information fields may be marked with an asterisk. While the most common fields will be shown, not all of them are required.
	To add additional parameters, scroll down in the template mini-editor and click on the "Add more information" option. Click on "Insert" when you're done.

Editing images and other media files

Editing images

문서에 새 이미지 파일을 추가하려면, 툴바에 있는 산 그림 모양의 "미디어" 아이콘을 클릭하십시오.
Clicking the "Media" icon opens a dialog that automatically searches Wikimedia Commons and your local wiki for media files related to the title of the page you're editing. 대화창의 검색어 상자에 찾을 문자열을 바꾸면 다른 미디어 파일을 찾아볼 수 있습니다. 파일을 선택하려면 섬네일을 클릭하십시오. This places the image onto the page you are editing.
After the image you selected is inserted into the page, another dialog will open. This dialog allows you to add and edit the caption of the image. The caption can contain formatting and links.
The media dialog also allows you to add alternative text captions, to help users who use screen readers, or who have disabled image display.
You can also set various parameters for the image in the "Advanced settings" window. These include the alignment, the type, and size of the image.
작업을 마쳤다면, 대화창을 닫고 편집기로 돌아가기 위해 "Apply changes"을 클릭하십시오.
For an existing image, you can add or edit a caption or other settings by clicking on the image, then clicking on the "Media" icon that appears below the picture. You can resize an existing image by clicking on it, then moving the resize icon (the two-headed arrow on the bottom left). You can also drag and drop an image to a place higher or lower on the page.

Editing media galleries

To edit an existing gallery in VisualEditor, click that gallery. Then, near the bottom of the gallery, click the gallery icon (a set of photos). This brings up the gallery editor, with the full list of images included in the gallery.
The gallery editor is currently a simple box that allows you to edit existing galleries using wikitext markup. To add a new image to an existing gallery, type the file name, followed by a bar (|) and the caption for that image. You must put each image in the gallery on its own line. You can also edit this list to remove or rearrange images or to change captions. When you click the "Done" button, you will exit the gallery editor. You should then see your changes, with the gallery as it will now appear to readers. Remember that exiting the gallery editor does not save your changes. As with other changes made using VisualEditor, you must save the entire page in order to save your work.

틀 편집하기

To add a new template to the page, place your cursor where you want the template to be inserted, and click on the "Template" icon (puzzle piece) in the "Insert" menu.
Type the name of the template you want to insert. When you see it on the list, click on its name. Then click "Add template".
You can also edit templates that are already on the page by selecting them (they turn blue), and clicking on the "Template" icon (puzzle piece) that appears.
Adding a new template or opening an existing one opens the "Transclusion" dialog. If the template has have been updated to contain TemplateData information, then the dialog will show a list of individual parameters; otherwise, a link to the documentation will be available in the dialog. If you are editing an existing template, and the template has been updated, then the dialog will show the values for the parameters.
For an existing template, you edit the parameters already listed, and you can add additional parameters by clicking "Add more information", at the very bottom of the dialog.
틀이 다른 틀을 포함하고 있을 경우에는, 안쪽 틀은 변수값으로 나타납니다. 안쪽 틀은 안쪽 틀의 이름을 클릭하면 편집하거나 제거할 수 있습니다. 새로운 안쪽 틀은 변수를 추가하는 다음 방식을 통해 추가할 수 있습니다. 틀 설명 문서에서 틀이 내부 틀을 지원하는지 확인해볼 필요가 있습니다.
작업을 마쳤다면, 대화창을 닫고 편집기로 돌아가기 위해 "Apply changes"을 클릭하십시오.
틀 풀기
틀을 반드시 풀어주어야 할 경우에는, 틀 이름 앞에 subst:(콜론 포함)를 넣어주십시오. subst:를 쓰면 자동 완성이 되지 않습니다. 자동 완성이 필요하다면 찾는 틀을 먼저 찾고 나서 subst:를 추가하십시오. 그리고, 녹색의 "Add template" 버튼을 클릭하십시오.
어떤 변수든지 평소대로 추가해 입력하고 "Apply changes"을 클릭합니다.
처음에는 문서에 틀이 풀린 모습이 보이지 않을 것입니다.

분류 편집하기

	To edit categories, on the "Page options" menu, click the "Categories" button.
	The "Categories" button opens a dialog that lists existing categories and allows you to add new ones. You have the option of setting or changing the general (default) sorting key, which used to determine where the page appears when listed with other pages in the same category. For example, the default sorting key for the article "George Washington" is "Washington, George", and so in the category "Presidents of the United States", the article is listed under the letter "W", not the letter "G".
	To add a category for a page, type the name of the category into the field "Add a category". As you type, VisualEditor will search for possible matching, existing categories. You can either select an existing category, or you can add a category that doesn't yet have its own category page. (Until that category page is created, your new category will show as a red link after you save all your editing changes.)
	To remove an existing category, click on it and click on the "Remove" icon (trash can) in the dialog that opens. Clicking on a category also allows you to specify a sorting key for that specific category. Such a sorting key overrides the default sorting key.
	분류를 편집하는 작업을 마치고 문서 편집기로 돌아가려면 "Apply changes"을 클릭하십시오.

문서 설정 편집하기

	To edit a page's settings, click to open the "Page options" menu, in the toolbar, and select the "Page settings" button.
	The "Page settings" button opens a dialog that shows several options.
	You can make a page a redirect to another page by checking the "Redirect this page to" checkbox, and then typing the name of the page to which you want to send the reader who tries to go to the page that you're editing. At the bottom is the option to prevent page renames from updating this redirect. This is very rarely used.
File:VisualEditor Page Settings TOC-ko.png	You can change whether the page shows a Table of Contents by selecting one of these three buttons. The default option is "If needed", which shows a Table of Contents if there are three or more headings.
	You can make a page not show edit links next to each section header by checking this checkbox.
	Click "Apply changes" when you're done editing the Page options to return to the page editor.

수학 수식 편집하기

To add a new mathematical formula to the page, place your cursor where you want it to be inserted, and click on the "Formula" icon ("Σ") in the "Insert" menu on the toolbar.
A window will open in which you can type the formula, using LaTeX syntax. VisualEditor will update the formula as you type it, so you can see how it will look as you make changes. Once you are happy with the formula, click the "Done" button.
To edit an existing mathematical formula on the page, click on it and then click on the "Σ" icon that appears. This will open up the formula window, where you make changes.

시나 다른 특수 항목 편집하기

Some items, such as poems and musical scores, are not yet supported by VisualEditor. Until they are, you will need to edit the source wikitext directly if you want to add these or change these.

키보드 단축키

Many editors are used to entering wikitext directly, especially bold, italics and wikilinks. Keyboard shortcuts allow to quickly insert similar formatting without having to use toolbar items. Here are the common general shortcuts in VisualEditor:

PC 단축키	동작	Mac 단축키
⌃ Ctrl+B	굵은 글씨	⌘ Cmd+B
⌃ Ctrl+I	기울인 글씨	⌘ Cmd+I
⌃ Ctrl+K	링크 삽입하기	⌘ Cmd+K
⌃ Ctrl+X	잘라내기	⌘ Cmd+X
⌃ Ctrl+C	복사하기	⌘ Cmd+C
⌃ Ctrl+V	붙여넣기	⌘ Cmd+V
⌃ Ctrl+Z	실행 취소	⌘ Cmd+Z