I'm facing some issues with Linux (Fedora and Ubuntu). First of all, when I installed Ubuntu it was sort of hibernating when booting then I installed Fedora, everything works fine, but when I boot the computer and log into my account like 1min later the computer hibernates so I have to press the power button again and log again, after that, the computer works fine for several hours. Do you have any tips of what it might be?
EDIT
Here are the last logs of dmesg until the moment it comes back from hibernating
[ 15.463368] cfg80211: Calling CRDA to update world regulatory domain
[ 16.956811] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 16.967079] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 16.967428] rtlwifi: rtlwifi: wireless switch is on
[ 17.100186] rtl8192ce 0000:02:00.0 wlp2s0: renamed from wlan0
[ 17.739374] intel_rapl: Found RAPL domain package
[ 17.739384] intel_rapl: Found RAPL domain core
[ 17.739392] intel_rapl: Found RAPL domain uncore
[ 17.934900] cfg80211: World regulatory domain updated:
[ 17.934903] cfg80211: DFS Master region: unset
[ 17.934905] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.934907] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.934909] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.934910] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.934912] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 17.934914] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 17.934915] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 17.934917] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.934918] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.603122] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 18.603129] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.603133] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 18.603136] sound hdaudioC0D0: mono: mono_out=0x0
[ 18.603139] sound hdaudioC0D0: inputs:
[ 18.603143] sound hdaudioC0D0: Internal Mic=0x19
[ 18.603147] sound hdaudioC0D0: Mic=0x18
[ 18.613312] cfg80211: Calling CRDA for country: BR
[ 18.620516] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 18.621596] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 18.622922] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 18.624483] cfg80211: Regulatory domain changed to country: BR
[ 18.624487] cfg80211: DFS Master region: FCC
[ 18.624489] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.624492] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.624495] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 18.624497] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[ 18.624500] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[ 18.624502] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 28.968078] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 28.968098] SELinux: initialized (dev sda4, type ext4), uses xattr
[ 30.092296] audit: type=1305 audit(1432721537.098:4): audit_pid=670 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 31.384900] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 31.403137] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 31.439115] Ebtables v2.0 registered
[ 31.455480] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 32.759017] r8169 0000:04:00.0 enp4s0: link down
[ 35.558359] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 36.833795] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 47.963288] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 50.011499] fuse init (API version 7.23)
[ 50.036464] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 50.047234] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 50.955910] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 52.004229] Bluetooth: Core ver 2.20
[ 52.004307] NET: Registered protocol family 31
[ 52.004309] Bluetooth: HCI device and connection manager initialized
[ 52.004314] Bluetooth: HCI socket layer initialized
[ 52.004317] Bluetooth: L2CAP socket layer initialized
[ 52.004325] Bluetooth: SCO socket layer initialized
[ 52.078732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 52.078740] Bluetooth: BNEP filters: protocol multicast
[ 52.078749] Bluetooth: BNEP socket layer initialized
[ 70.420676] wlp2s0: authenticate with 00:1b:11:3c:f9:c9
[ 70.438750] wlp2s0: send auth to 00:1b:11:3c:f9:c9 (try 1/3)
[ 70.440433] wlp2s0: authenticated
[ 70.440612] rtl8192ce 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[ 70.440619] rtl8192ce 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[ 70.440623] rtl8192ce 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[ 70.440751] wlp2s0: associate with 00:1b:11:3c:f9:c9 (try 1/3)
[ 70.444286] wlp2s0: RX AssocResp from 00:1b:11:3c:f9:c9 (capab=0x431 status=0 aid=1)
[ 70.444584] wlp2s0: associated
[ 75.203102] usb 2-1.1: USB disconnect, device number 3
[ 75.632299] usb 2-1.1: new low-speed USB device number 4 using ehci-pci
[ 75.723248] usb 2-1.1: New USB device found, idVendor=1c4f, idProduct=0032
[ 75.723252] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 75.723254] usb 2-1.1: Product: Usb Mouse
[ 75.723256] usb 2-1.1: Manufacturer: SIGMACHIP
[ 75.727289] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1C4F:0032.0002/input/input18
[ 75.727609] hid-generic 0003:1C4F:0032.0002: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1d.0-1.1/input0
[ 76.971419] Adjusting tsc more than 11% (6262408 vs 8115226)
[ 180.900763] wlp2s0: deauthenticating from 00:1b:11:3c:f9:c9 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 180.913139] cfg80211: Calling CRDA to update world regulatory domain
[ 180.916991] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 180.919100] cfg80211: World regulatory domain updated:
[ 180.919106] cfg80211: DFS Master region: unset
[ 180.919107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.919111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.919114] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.919116] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.919120] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 180.919123] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 180.919126] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 180.919129] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.919131] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 180.919148] cfg80211: Calling CRDA for country: BR
[ 180.924697] cfg80211: Regulatory domain changed to country: BR
[ 180.924702] cfg80211: DFS Master region: FCC
[ 180.924704] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.924709] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 180.924712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 180.924716] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[ 180.924719] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[ 180.924722] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 183.683869] PM: Syncing filesystems ... done.
[ 184.570536] PM: Preparing system for mem sleep
[ 184.571692] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 184.573794] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 184.575047] PM: Entering mem sleep
[ 184.575155] Suspending console(s) (use no_console_suspend to debug)
[ 184.575644] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 184.687296] sd 0:0:0:0: [sda] Stopping disk
[ 185.078189] PM: suspend of devices complete after 503.052 msecs
[ 185.089161] PM: late suspend of devices complete after 10.954 msecs
[ 185.091081] r8169 0000:04:00.0: System wakeup enabled by ACPI
[ 185.091180] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 185.091270] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 185.102226] PM: noirq suspend of devices complete after 13.067 msecs
[ 185.102558] ACPI: Preparing to enter system sleep state S3
[ 185.110000] PM: Saving platform NVS memory
[ 185.110541] Disabling non-boot CPUs ...
[ 185.110589] intel_pstate CPU 1 exiting
[ 185.112379] kvm: disabling virtualization on CPU1
[ 185.112737] smpboot: CPU 1 is now offline
[ 185.113122] intel_pstate CPU 2 exiting
[ 185.114375] kvm: disabling virtualization on CPU2
[ 185.114384] smpboot: CPU 2 is now offline
[ 185.114732] intel_pstate CPU 3 exiting
[ 185.115966] kvm: disabling virtualization on CPU3
[ 185.115983] smpboot: CPU 3 is now offline
[ 185.117559] ACPI: Low-level resume complete
[ 185.117600] PM: Restoring platform NVS memory
[ 185.118562] CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 185.118678] Enabling non-boot CPUs ...
[ 185.118718] x86: Booting SMP configuration:
[ 185.118719] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 185.130458] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 185.130527] kvm: enabling virtualization on CPU1
[ 185.133159] CPU1 is up
[ 185.133185] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 185.144355] kvm: enabling virtualization on CPU2
[ 185.146662] CPU2 is up
[ 185.146689] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 185.157758] kvm: enabling virtualization on CPU3
[ 185.160081] CPU3 is up
[ 185.163417] ACPI: Waking up from system sleep state S3
[ 186.041405] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 186.041596] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 186.042024] PM: noirq resume of devices complete after 12.067 msecs
[ 186.042626] PM: early resume of devices complete after 0.513 msecs
[ 186.044293] rtlwifi: rtlwifi: wireless switch is on
[ 186.044334] r8169 0000:04:00.0: System wakeup disabled by ACPI
[ 186.044443] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 186.047979] sd 0:0:0:0: [sda] Starting disk
[ 186.173937] r8169 0000:04:00.0 enp4s0: link down
[ 186.201733] PM: resume of devices complete after 159.163 msecs
[ 186.220608] PM: Finishing wakeup.
[ 186.220612] Restarting tasks ... done.
[ 186.224919] video LNXVIDEO:00: Restoring backlight state
[ 186.289858] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 186.319763] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 186.352529] ata4: SATA link down (SStatus 0 SControl 300)
[ 186.356523] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 186.358187] ata2.00: configured for UDMA/100
[ 186.450479] r8169 0000:04:00.0 enp4s0: link down
[ 186.806724] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 186.806728] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 186.806730] usb 1-1.2: Product: USB2.0-CRW
[ 186.806732] usb 1-1.2: Manufacturer: Generic
[ 186.806734] usb 1-1.2: SerialNumber: 20071114173400000
[ 186.814359] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 186.828862] scsi host7: usb-storage 1-1.2:1.0
[ 186.948868] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 187.069355] usb 1-1.2: USB disconnect, device number 4
[ 187.624006] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 187.634040] ata1.00: configured for UDMA/133
[ 189.945500] wlp2s0: authenticate with 00:1b:11:3c:f9:c9
[ 189.963846] wlp2s0: send auth to 00:1b:11:3c:f9:c9 (try 1/3)
[ 189.969447] wlp2s0: authenticated
[ 189.969624] rtl8192ce 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
[ 189.969630] rtl8192ce 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
[ 189.969633] rtl8192ce 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
[ 189.970896] wlp2s0: associate with 00:1b:11:3c:f9:c9 (try 1/3)
[ 189.974802] wlp2s0: RX AssocResp from 00:1b:11:3c:f9:c9 (capab=0x431 status=0 aid=1)
[ 189.975117] wlp2s0: associated
dmesgafter this happens would help point us in the right direction – sam 2 days ago