A tag is a keyword or label that categorizes your question with other, similar questions. Using the right tags makes it easier for others to find and answer your question.
| Type to find tags: |
|
arduino-uno× 3164
the most common of the Arduino boards. It is based on the ATmega328 microcontroller.
|
serial× 924
the standard USB connection between the Arduino and a computer with a standard USB A to B cable or through the TX/RX pins using a USB to serial converter. It can also refer to …
|
arduino-mega× 724
A microcontroller board based on the ATmega2560 or 1280 chip. Use this tag for questions specifically regarding the Mega, and not just general Arduino usage.
|
programming× 677
The process of designing and writing source code as part of a program (or sketch) for Arduino. Do not use for uploading to an Arduino board.
|
|
sensors× 518
for questions about selecting, connecting, using, and debugging sensors.
|
c++× 474
the standard language used to program the Arduino IDE. However, the Arduino IDE does have lots of libraries built in, so functions such as "main" are not called directly in the sketch code. Mos…
|
arduino-ide× 408
for questions about the official IDE. The open-source IDE makes it easy to write code and upload it to any Arduino board. It runs on Windows, Mac OS X, and Linux.
|
power× 361
for questions regarding powering and/or power consumption of Arduino systems.
|
|
esp8266× 320
An IC that offers Wi-Fi networking compatible with b/g/n standards. It also has integrated TCP/IP protocol stack. Extremely popular along IoT community as a low cost and powerful board.
|
led× 319
a type of light source which is typically fairly small and has low power requirements.
|
bluetooth× 306
Bluetooth enables short-range wireless communication between devices.
|
motor× 304
for questions about connecting, controlling, and safely operating motors using an Arduino board.
|
|
arduino-nano× 265
a small board based on the ATmega328 or 168. It has male headers, so it can be plugged directly into a breadboard. It is small and compact, and features a USB chip.
|
wifi× 246
a trademark of the Wi-Fi Alliance. A Wi-Fi enabled device such as a personal computer, video game console, smartphone, or digital audio player can connect to the Internet when within range of…
|
arduino-due× 232
an microcontroller card based on the Atmel SAM3X8E ARM Cortex-M3 CPU. This is a 32bit ARM core MCU.
|
i2c× 222
a bus for low speed peripherals. Use this tag for questions regarding how to use I²C with an Arduino, or for problems with I²C and your Arduino.
|
|
shields× 222
attachments that "snap" onto the Arduino board adding functionality. They are usually the same shape as an Uno/Leonardo/Duemilanove. Some examples are: the Ethernet (includes SD port) shie…
|
usb× 218
Widely used standard for connecting computers to other devices, such as printers and keyboards.
|
lcd× 214
LCD stands for "Liquid Crystal Display" and is commonly known as a screen. The tag should be used for questions related to LCD display.
|
library× 211
a file that can be included into the code to add new instructions by combining many existing instructions and creating one easy to use instruction to call.
|
|
pins× 206
like gateways between the Arduino code running on the chip and the components attached to Arduino. It can refer either to the physical connectors on the board, or it can refer to the pins d…
|
gsm× 205
a very widely used standard for communication over mobile phone networks.
|
ethernet× 198
Ethernet can be used for communication between an Arduino and a computer, server, or website. For question concerning the Arduino Ethernet board, use the tag "arduino-ethernet" instead.
|
servo× 183
a type of motor which uses a feedback mechanism for precise control of speed and position.
|
|
c× 182
a procedural programming language which is widely used in embedded systems. PLEASE NOTE: Arduino is typically programmed in C++, not C.
|
pwm× 181
a form of signal modulation that allows digital output to approximate an analog signal. Use this for questions about using the PWM pins (marked with ~).
|
communication× 179
for questions about communication between multiple devices.
|
interrupt× 179
Interrupts allow the processor to suspend normal operation temporarily so that a high-priority software or hardware event can be handled instead.
|
|
atmega328× 168
the chip that is the heart of the Arduino Uno. It is popular also as a chip to use to create your own board. Since it is available in the through hole version, it can be placed on a b…
|
softwareserial× 161
A library for emulating UART functionality in software on any available digital IO pins. Use this tag for questions regarding SoftwareSerial.
|
arduino-yun× 158
a microcontroller board based on the ATmega32u4 and the Atheros AR9331. Use this tag for questions specifically regarding the Yún, and not just general Arduino usage.
|
arduino-leonardo× 151
An Arduino board based on the ATmega32u4 chip with built in USB HID functionality
|
|
voltage-level× 149
Voltage level should be used for questions that are referring to using hardware together that operates on different voltages (the "concentration" of electricity).
|
uploading× 148
the process of updating or changing the sketch on the Arduino board. It does not refer to uploading to a server or a website.
|
sketch× 146
compiled code that is uploaded to an Arduino board.
|
analogread× 143
A standard Arduino function for detecting the voltage on an analog pin via ADC.
|
