Arduino is an open source hardware and software company and maker community. Arduino started in the early 2000s. Popular with electronic makers, Arduino offers a lot of flexibility through an open source system.
Displaying the current tool number {after T0/T1/T2/...) on the screen would be helpful with MMU2 or other toolchanger.
The number can be displayed inside the nozzle picture.
In the advanced example radio buttons are used with HTML injection.
It seems to be impossible to get the labels and the radioboxes well alligned?
I've tried in-line css but to no avail, the alignement of the radiobuttons stays central, even with or without the label.
Anybody know where to look for in order to get this working properly?
Where is the CSS used in this project?
WiFiManager
Created by Massimo Banzi
Released 2003
The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:
sip.js(1128): uncompensated = uint16(data[0], data[1]);
Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media