Postgres Pro Standard : Documentation: 10: pgbouncer : Postgres Professional

Русский

This page in other versions:
Postgres Pro Standard
10
( current )
|
Postgres Pro Enterprise
10
/
9.6
|
PostgreSQL

pgbouncer
Prev	Up	G.2. Server Applications	Home	Next

pgbouncer

pgbouncer — a Postgres Pro connection pooler

Synopsis

On Linux systems:

pgbouncer [ -d ] [ -R ] [ -v ] [ -u user ] pgbouncer.ini

pgbouncer -V | -h

On Windows systems:

pgbouncer [ -v ] [ -u user ] pgbouncer.ini

pgbouncer -V | -h

To use pgbouncer as a Windows service:

pgbouncer.exe --regservice pgbouncer.ini

pgbouncer.exe --unregservice pgbouncer.ini

Description

pgbouncer is a Postgres Pro connection pooler. Any target application can be connected to pgbouncer as if it were a Postgres Pro server, and pgbouncer will create a connection to the actual server, or it will reuse one of its existing connections.

The aim of pgbouncer is to lower the performance impact of opening new connections to Postgres Pro.

In order not to compromise transaction semantics for connection pooling, pgbouncer supports several types of pooling when rotating connections:

Session pooling: Most polite method. When client connects, a server connection will be assigned to it for the whole duration the client stays connected. When the client disconnects, the server connection will be put back into the pool. This is the default method.
Transaction pooling: A server connection is assigned to client only during a transaction. When pgbouncer notices that transaction is over, the server connection will be put back into the pool.
Statement pooling: Most aggressive method. The server connection will be put back into pool immediately after a query completes. Multi-statement transactions are disallowed in this mode as they would break.

The administration interface of pgbouncer consists of some new SHOW commands available when connected to a special 'virtual' database pgbouncer.

Quick Start

Basic setup and usage is as follows.

Create a pgbouncer.ini file. For example:

[databases]
template1 = host=127.0.0.1 port=5432 dbname=template1

[pgbouncer]
listen_port = 6543
listen_addr = 127.0.0.1
auth_type = md5
auth_file = users.txt
logfile = pgbouncer.log
pidfile = pgbouncer.pid
admin_users = someuser

Create users.txt file that contains users allowed in:
```
"someuser" "same_password_as_in_server"
```
Launch pgbouncer:
```
$ pgbouncer -d pgbouncer.ini
```
Note
The above command does not work on Windows systems. Instead, pgbouncer must be launched as a service that first needs to be registered, as follows:
```
pgbouncer --regservice
```
Have your application (or the psql client) connect to pgbouncer instead of directly to Postgres Pro server:
```
$ psql -p 6543 -U someuser template1
```

Manage pgbouncer by connecting to the special administration database pgbouncer and issuing show help; to begin:

$ psql -p 6543 -U someuser pgbouncer
pgbouncer=# show help;
NOTICE:  Console usage
DETAIL:
  SHOW [HELP|CONFIG|DATABASES|FDS|POOLS|CLIENTS|SERVERS|SOCKETS|LISTS|VERSION]
  SET key = arg
  RELOAD
  PAUSE
  SUSPEND
  RESUME
  SHUTDOWN

If you made changes to the pgbouncer.ini file, you can reload it with:
```
pgbouncer=# RELOAD;
```

Options

-d: Run in background. Without it the process will run in foreground.
Note
Does not work on Windows, pgbouncer needs to run as service there.
-R: Do an online restart. That means connecting to the running process, loading the open sockets from it, and then using them. If there is no active process, boot normally.
Note
Works only if OS supports Unix sockets and the unix_socket_dir is not disabled in config. Does not work on Windows systems. Does not work with TLS connections, they are dropped.
-u user: Switch to the given user on startup.
-v: Increase verbosity. Can be used multiple times.
-q: Be quiet — do not log to stdout.
Note
This does not affect logging verbosity, only that stdout is not to be used. For use in init.d scripts.
-V: Show version.
-h: Show short help.
--regservice: Win32: Register to run as Windows service. The service_name config parameter value is used as name to register under.
--unregservice: Win32: Unregister Windows service.

Admin Console

The console is available by connecting as normal to the database pgbouncer:

$ psql -p 6543 pgbouncer

Only users listed in configuration parameters admin_users or stats_users are allowed to login to the console. (Except when auth_mode=any, then any user is allowed in as a stats_user.)

Additionally, the username pgbouncer is allowed to log in without password, if the login comes via Unix socket and the client has same Unix user uid as the running process.

Show Commands

The SHOW commands output information. Each command is described below.

SHOW STATS;

Shows statistics.

database: Statistics are presented per database.
total_requests: Total number of SQL requests pooled by pgbouncer.
total_received: Total volume in bytes of network traffic received by pgbouncer.
total_sent: Total volume in bytes of network traffic sent by pgbouncer.
total_query_time: Total number of microseconds spent by pgbouncer when actively connected to Postgres Pro.
avg_req: Average requests per second in last stat period.
avg_recv: Average received (from clients) bytes per second.
avg_sent: Average sent (to clients) bytes per second.
avg_query: Average query duration in microseconds.

SHOW SERVERS;

type: S, for server.
user: Username pgbouncer uses to connect to server.
database: Database name.
state: State of the pgbouncer server connection, one of active, used or idle.
addr: IP address of Postgres Pro server.
port: Port of Postgres Pro server.
local_addr: Connection start address on local machine.
local_port: Connection start port on local machine.
connect_time: When the connection was made.
request_time: When last request was issued.
ptr: Address of internal object for this connection. Used as unique ID.
link: Address of client connection the server is paired with.
remote_pid: Process ID (PID) of backend server process. In case connection is made over Unix socket and OS supports getting process ID info, it's OS PID. Otherwise it's extracted from cancel packet server sent, which should be PID in case server is Postgres Pro, but it's a random number in case server is another pgbouncer.

SHOW CLIENTS;

type: C, for client.
user: Client connected user.
database: Database name.
state: State of the client connection, one of active, used, waiting or idle.
addr: IP address of client.
port: Port client is connected to.
local_addr: Connection end address on local machine.
local_port: Connection end port on local machine.
connect_time: Timestamp of connect time.
request_time: Timestamp of latest client request.
ptr: Address of internal object for this connection. Used as unique ID.
link: Address of server connection the client is paired with.
remote_pid: Process ID, in case client connects over Unix socket and OS supports getting it.

SHOW POOLS;

A new pool entry is made for each couple of (database, user).

database: Database name.
user: User name.
cl_active: Client connections that are linked to server connection and can process queries.
cl_waiting: Client connections have sent queries but have not yet got a server connection.
sv_active: Server connections that linked to client.
sv_idle: Server connections that are unused and immediately usable for client queries.
sv_used: Server connections that have been idle more than server_check_delay, so they need server_check_query to run on it before it can be used.
sv_tested: Server connections that are currently running either server_reset_query or server_check_query.
sv_login: Server connections currently in logging in process.
maxwait: How long the first (oldest) client in queue has waited, in seconds. If this starts increasing, then the current pool of servers does not handle requests quick enough. Reason may be either overloaded server or just too small of a pool_size setting.
pool_mode: The pooling mode in use.

SHOW LISTS;

Show following internal information, in columns (not rows):

databases: Count of databases.
users: Count of users.
pools: Count of pools.
free_clients: Count of free clients.
used_clients: Count of used clients.
login_clients: Count of clients in login state.
free_servers: Count of free servers.
used_servers: Count of used servers.

SHOW USERS;

name: The user name.
pool_mode: The user's override pool_mode, or NULL if the default will be used instead.

SHOW DATABASES;

name: Name of configured database entry.
host: Host pgbouncer connects to.
port: Port pgbouncer connects to.
database: Actual database name pgbouncer connects to.
force_user: When user is part of the connection string, the connection between pgbouncer and Postgres Pro is forced to the given user, whatever the client user.
pool_size: Maximum number of server connections.
pool_mode: The database's override pool_mode, or NULL if the default will be used instead.

SHOW FDS;

Internal command — shows list of file descriptors (FDs) in use with internal state attached to them.

When the connected user has username pgbouncer, connects through Unix socket and has same UID as running process, the actual FDs are passed over the connection. This mechanism is used to do an online restart.

Note

This does not work on Windows systems.

This command also blocks internal event loop, so it should not be used while pgbouncer is in use.

fd: File descriptor numeric value.
task: One of pooler, client or server.
user: User of the connection using the FD.
database: Database of the connection using the FD.
addr: IP address of the connection using the FD, unix if a Unix socket is used.
port: Port used by the connection using the FD.
cancel: Cancel key for this connection.
link: File descriptor for corresponding server/client. NULL if idle.

SHOW CONFIG;

Show the current configuration settings, one per row, with following columns:

key: Configuration variable name.
value: Configuration value.
changeable: Either yes or no, shows if the variable can be changed while running. If no, the variable can be changed only boot-time.

SHOW DNS_HOSTS;

Show hostnames in DNS cache.

hostname: Host name.
ttl: How many seconds until next lookup.
addrs: Comma separated list of addresses.

SHOW DNS_ZONES

Show DNS zones in cache.

zonename: Zone name.
serial: Current serial.
count: Hostnames belonging to this zone.

Process Controlling Commands

PAUSE [`db`];

pgbouncer tries to disconnect from all servers, first waiting for all queries to complete. The command will not return before all queries are finished. To be used at the time of database restart.

If database name is given, only that database will be paused.

DISABLE `db`;

Reject all new client connections on the given database.

ENABLE `db`;

Allow new client connections after a previous DISABLE command.

KILL `db`;

Immediately drop all client and server connections on given database.

SUSPEND;

All socket buffers are flushed and pgbouncer stops listening for data on them. The command will not return before all buffers are empty. To be used at the time of pgbouncer online reboot.

RESUME [`db`];

Resume work from previous PAUSE or SUSPEND command.

SHUTDOWN;

The pgbouncer process will exit.

RELOAD;

The pgbouncer process will reload its configuration file and update changeable settings.

Signals

SIGHUP: Reload config. Same as issuing command RELOAD; on console.
SIGINT: Safe shutdown. Same as issuing PAUSE; and SHUTDOWN; on console.
SIGTERM: Immediate shutdown. Same as issuing SHUTDOWN; on console.

Libevent Settings

From libevent docs:

It is possible to disable support for epoll, kqueue, devpoll, poll, or select by setting the environment variable EVENT_NOEPOLL, EVENT_NOKQUEUE, EVENT_NODEVPOLL, EVENT_NOPOLL or EVENT_NOSELECT, respectively.
By setting the environment variable EVENT_SHOW_METHOD, libevent displays the kernel notification method that it uses.

`pgbouncer.ini` Configuration File

Configuration file is in the .ini format. Section names are between "[" and "]". Lines starting with ";" or "#" are taken as comments and ignored. The characters ";" and "#" are not recognized when they appear later in the line.

Generic Settings

logfile

Specifies log file. Log file is kept open so after rotation kill -HUP or on console RELOAD; should be done. Note: On Windows systems, the service must be stopped and started.

Default: not set.

pidfile

Specifies the PID file. Without a pidfile, daemonization is not allowed.

Default: not set.

listen_addr

Specifies list of addresses, where to listen for TCP connections. You may also use * meaning "listen on all addresses". When not set, only Unix socket connections are allowed.

Addresses can be specified numerically (IPv4/IPv6) or by name.

Default: not set.

listen_port

Which port to listen on. Applies to both TCP and Unix sockets.

Default: 6432

unix_socket_dir

Specifies location for Unix sockets. Applies to both listening socket and server connections. If set to an empty string, Unix sockets are disabled. Required for online reboot (-R) to work. Note: Not supported on Windows systems.

Default: /tmp

unix_socket_mode

Filesystem mode for Unix socket.

Default: 0777

unix_socket_group

Group name to use for Unix socket.

Default: not set

user

If set, specifies the Unix user to change to after startup. Works only if pgbouncer is started as root or if it's already running as given user.

Note: Not supported on Windows systems.

Default: not set

auth_file

The name of the file to load user names and passwords from. The file format is the same as the PostgreSQL 8.x pg_auth/pg_pwd file, so this setting can be pointed directly to one of those backend files. Since version 9.0, PostgreSQL does not use such text file, so it must be generated manually. See the section called “Authentication File Format” for details.

Default: not set.

auth_hba_file

HBA configuration file to use when auth_type is hba. Supported from version 1.7 onwards.

Default: not set

auth_type

How to authenticate users.

pam: Pluggable Authentication Modules (PAM) method is used to authenticate users, auth_file is ignored. This method is not compatible with databases using auth_user option. Service name reported to PAM is pgbouncer. Also, PAM is still not supported in HBA configuration file.
hba: Actual authentication type is loaded from auth_hba_file. This allows different authentication methods different access paths. Example: connection over Unix socket uses peer authentication method, connection over TCP must use TLS. Supported from version 1.7 onwards.
cert: Client must connect over TLS connection with valid client certificate. Username is then taken from CommonName field from certificate.
md5: Use MD5-based password check. auth_file may contain both MD5-encrypted or plain-text passwords. This is the default authentication method.
plain: Clear-text password is sent over wire. Deprecated.
trust: No authentication is done. Username must still exist in auth_file.
any: Like the trust method, but the username given is ignored. Requires that all databases are configured to log in as specific user. Additionally, the console database allows any user to log in as admin.

auth_query

Query to load user's password from database.

Direct access to pg_shadow requires admin rights. It's preferable to use non-admin user that calls SECURITY DEFINER function instead.

Note that the query is run inside target database, so if a function is used it needs to be installed into each database.

Default: SELECT usename, passwd FROM pg_shadow WHERE usename=$1

pool_mode

Specifies when a server connection can be reused by other clients.

session: Server is released back to pool after client disconnects. Default.
transaction: Server is released back to pool after transaction finishes.
statement: Server is released back to pool after query finishes. Long transactions spanning multiple statements are disallowed in this mode.

max_client_conn

Maximum number of client connections allowed. When increased, the file descriptor limits should also be increased. Note that actual number of file descriptors used is more than max_client_conn. If each user connects under its own username to server, theoretical maximum used is:

max_client_conn + (max_pool_size * total_databases * total_users)

If a database user is specified in connect string (all users connect under same username), the theoretical maximum is:

max_client_conn + (max_pool_size * total_databases)

The theoretical maximum should be never reached, unless somebody deliberately crafts special load for it. Still, it means you should set the number of file descriptors to a safely high number.

Search for ulimit in your favourite shell man page. Note: ulimit does not apply in a Windows environment.

Default: 100

default_pool_size

How many server connections to allow per user/database pair. Can be overridden in the per-database configuration.

Default: 20

min_pool_size

Add more server connections to pool if below this number. Improves behaviour when usual load suddenly comes back after a period of total inactivity.

Default: 0 (disabled)

reserve_pool_size

How many additional connections to allow to a pool. The 0 value disables this parameter.

Default: 0 (disabled)

reserve_pool_timeout

If a client has not been serviced in this many seconds, pgbouncer enables use of additional connections from reserve pool. The 0 value disables this parameter.

Default: 5.0

max_db_connections

Do not allow more than this many connections per-database (regardless of pool — i.e. user). It should be noted that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool.

Default: unlimited

max_user_connections

Do not allow more than this many connections per-user (regardless of pool — i.e. user). It should be noted that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool.

server_round_robin

By default, pgbouncer reuses server connections in LIFO (last-in, first-out) manner, so that few connections get the most load. This gives best performance if you have a single server serving a database. But if there is TCP round-robin behind a database IP, then it is better if pgbouncer also uses connections in that manner, thus achieving uniform load.

Default: 0

ignore_startup_parameters

By default, pgbouncer allows only parameters it can keep track of in startup packets — client_encoding, datestyle, timezone and standard_conforming_strings.

All other parameters will raise an error. To allow other parameters, they can be specified here, so that pgbouncer knows that they are handled by admin and it can ignore them.

Default: empty

disable_pqexec

Disable Simple Query protocol (PQexec). Unlike Extended Query protocol, Simple Query allows multiple queries in one packet, which allows some classes of SQL-injection attacks. Disabling it can improve security. Obviously this means only clients that exclusively use Extended Query protocol will stay working.

Default: 0

application_name_add_host

Add the client host address and port to the application name setting set on connection start. This helps in identifying the source of bad queries, etc. This logic applies only on start of connection, if application_name is later changed with SET, pgbouncer does not change it again.

Default: 0

conffile

Show location of current configuration file. Changing it will make pgbouncer use another configuration file for next RELOAD / SIGHUP.

Default: file from command line.

service_name

Used on win32 service registration.

Default: pgbouncer

job_name

Alias for service_name.

Log Settings

syslog

Toggles syslog on/off. On Windows systems, eventlog is used instead.

Default: 0

syslog_ident

Under what name to send logs to syslog.

Default: pgbouncer (program name)

syslog_facility

Under what facility to send logs to syslog. Possibilities: auth, authpriv, daemon, user, local0-7.

Default: daemon

log_connections

Log successful logins.

Default: 1

log_disconnections

Log disconnections with reasons.

Default: 1

log_pooler_errors

Log error messages pooler sends to clients.

Default: 1

stats_period

Period for writing aggregated stats into log.

Default: 60

verbose

Increase verbosity. Mirrors "-v" switch on command line. Using "-v -v" on command line is same as verbose=2 in configuration file.

Default: 0

Console Access Control

admin_users

Comma-separated list of database users that are allowed to connect and run all commands on console. Ignored when auth_type is any, in which case any username is allowed in as admin.

Default: empty

stats_users

Comma-separated list of database users that are allowed to connect and run read-only queries on console. Thats means all SHOW commands except SHOW FDS.

Default: empty.

Connection Sanity Checks, Timeouts

server_reset_query

Query sent to server on connection release, before making it available to other clients. At that moment no transaction is in progress so it should not include ABORT or ROLLBACK.

The query is supposed to clean any changes made to database session so that next client gets connection in well-defined state. Default is DISCARD ALL which cleans everything, but that leaves next client no pre-cached state. It can be made lighter, e.g. DEALLOCATE ALL to just drop prepared statements, if application does not break when some state is kept around.

When transaction pooling is used, the server_reset_query is not used, as clients must not use any session-based features as each transaction ends up in different connection and thus gets different session state.

Default: DISCARD ALL

server_reset_query_always

Whether server_reset_query should be run in all pooling modes. When this setting is off (default), the server_reset_query will be run only in pools that are in sessions-pooling mode. Connections in transaction-pooling mode should not have any need for reset query.

It is workaround for broken setups that run apps that use session features over transaction-pooled pgbouncer. It changes non-deterministic breakage to deterministic breakage — client always lose their state after each transaction.

Default: 0

server_check_delay

How long to keep released connections available for immediate re-use, without running sanity-check queries on it. If 0 then the query is always run.

Default: 30.0

server_check_query

Simple do-nothing query to check if the server connection is alive.

If an empty string, then sanity checking is disabled.

Default: SELECT 1;

server_lifetime

pgbouncer will try to close server connections that have been connected longer than this. Setting it to 0 means the connection is to be used only once, then closed. [seconds]

Default: 3600.0

server_idle_timeout

If a server connection has been idle more than this many seconds it will be dropped. If 0 then timeout is disabled. [seconds]

Default: 600.0

server_connect_timeout

If connection and login won't finish in this amount of time, the connection will be closed. [seconds]

Default: 15.0

server_login_retry

If login failed, because of failure from connect() or authentication that pooler waits this much before retrying to connect. [seconds]

Default: 15.0

client_login_timeout

If a client connects but does not manage to login in this amount of time, it will be disconnected. Mainly needed to avoid dead connections stalling SUSPEND and thus online restart. [seconds]

Default: 60.0

autodb_idle_timeout

If the automatically created (via "*") database pools have been unused this many seconds, they are freed. The negative aspect of that is that their statistics are also forgotten. [seconds]

Default: 3600.0

dns_max_ttl

How long the DNS lookups can be cached. If a DNS lookup returns several answers, pgbouncer will robin-between them in the meantime. Actual DNS TTL is ignored. [seconds]

Default: 15.0

dns_nxdomain_ttl

How long error and NXDOMAIN DNS lookups can be cached. [seconds]

Default: 15.0

dns_zone_check_period

Period to check if zone serial has changed.

pgbouncer can collect DNS zones from hostnames (everything after first dot) and then periodically check if zone serial changes. If it notices changes, all hostnames under that zone are looked up again. If any host IP changes, it's connections are invalidated.

Works only with UDNS backend (--with-udns to configure).

Default: 0.0 (disabled)

TLS Settings

client_tls_sslmode

TLS mode to use for connections from clients. TLS connections are disabled by default. When enabled, client_tls_key_file and client_tls_cert_file must be also configured to set up key and cert pgbouncer uses to accept client connections.

disable: Plain TCP. If client requests TLS, it's ignored. Default.
allow: If client requests TLS, it is used. If not, plain TCP is used. If client uses client-certificate, it is not validated.
prefer: Same as allow.
require: Client must use TLS. If not, client connection is rejected. If client uses client-certificate, it is not validated.
verify-ca: Client must use TLS with valid client certificate.
verify-full: Same as verify-ca.

client_tls_key_file

Private key for pgbouncer to accept client connections.

Default: not set.

client_tls_cert_file

Certificate for private key. Clients can validate it.

Default: not set.

client_tls_ca_file

Root certificate file to validate client certificates.

Default: unset.

client_tls_protocols

Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2), secure (tlsv1.2), legacy (all).

Default: all

client_tls_ciphers

Default: fast

client_tls_ecdhcurve

Elliptic Curve name to use for ECDH key exchanges.

Allowed values: none (DH is disabled), auto (256-bit ECDH), curve name.

Default: auto

client_tls_dheparams

DHE key exchange type.

Allowed values: none (DH is disabled), auto (2048-bit DH), legacy (1024-bit DH).

Default: auto

server_tls_sslmode

TLS mode to use for connections to Postgres Pro servers. TLS connections are disabled by default.

disable: Plain TCP. TLS is not even requested from server. Default.
prefer: TLS connection is always requested first from Postgres Pro, when refused connection will be established over plain TCP. Server certificate is not validated.
require: Connection must go over TLS. If server rejects it, plain TCP is not attempted. Server certificate is not validated.
verify-ca: Connection must go over TLS and server certificate must be valid according to server_tls_ca_file. Server hostname is not checked against certificate.
verify-full: Connection must go over TLS and server certificate must be valid according to server_tls_ca_file. Server hostname must match certificate info.

server_tls_ca_file

Root certificate file to validate Postgres Pro server certificates.

Default: unset.

server_tls_key_file

Private key for pgbouncer to authenticate against Postgres Pro server.

Default: not set.

server_tls_cert_file

Certificate for private key. Postgres Pro server can validate it.

Default: not set.

server_tls_protocols

Which TLS protocol versions are allowed. Allowed values: tlsv1.0, tlsv1.1, tlsv1.2. Shortcuts: all (tlsv1.0,tlsv1.1,tlsv1.2), secure (tlsv1.2), legacy (all).

Default: all

server_tls_ciphers

Default: fast

Dangerous Timeouts

Setting the following timeouts causes unexpected errors.

query_timeout

Queries running longer than that are canceled. This should be used only with slightly smaller server-side statement_timeout, to apply only for network problems. [seconds]

Default: 0.0 (disabled)

query_wait_timeout

Maximum time queries are allowed to spend waiting for execution. If the query is not assigned to a server during that time, the client is disconnected. This is used to prevent unresponsive servers from grabbing up connections. [seconds]

It also helps when server is down or database rejects connections for any reason. If this is disabled, clients will be queued infinitely.

Default: 120

client_idle_timeout

Client connections idling longer than this many seconds are closed. This should be larger than the client-side connection lifetime settings, and only used for network problems. [seconds]

Default: 0.0 (disabled)

idle_transaction_timeout

If client has been in "idle in transaction" state longer, it will be disconnected. [seconds]

Default: 0.0 (disabled)

Low-Level Network Settings

pkt_buf

Internal buffer size for packets. Affects size of TCP packets sent and general memory usage. Actual libpq packets can be larger than this, so, no need to set it large.

Default: 4096

max_packet_size

Maximum size for Postgres Pro packets that pgbouncer allows through. One packet is either one query or one resultset row. Full resultset can be larger.

Default: 2147483647

listen_backlog

Backlog argument for listen(2). Determines how many new unanswered connection attempts are kept in queue. When queue is full, further new connections are dropped.

Default: 128

sbuf_loopcnt

How many times to process data on one connection, before proceeding. Without this limit, one connection with a big resultset can stall pgbouncer for a long time. One loop processes one pkt_buf amount of data. 0 means no limit.

Default: 5

suspend_timeout

How many seconds to wait for buffer flush during SUSPEND or reboot (-R). Connection is dropped if flush does not succeed.

Default: 10

tcp_defer_accept

For details on this and other TCP options, please see man 7 tcp.

Default: 45 on Linux, otherwise 0

tcp_socket_buffer

Default: not set

tcp_keepalive

Turns on basic keepalive with OS defaults.

On Linux, the system defaults are tcp_keepidle=7200, tcp_keepintvl=75, tcp_keepcnt=9. They are probably similar on other operating systems.

Default: 1

tcp_keepcnt

Default: not set

tcp_keepidle

Default: not set

tcp_keepintvl

Default: not set

Section [databases]

This contains key=value pairs where key will be taken as a database name and value as a libpq connect-string style list of key=value pairs. As actual libpq is not used, not all features from libpq can be used (service=, .pgpass).

Database name can contain characters _0-9A-Za-z without quoting. Names that contain other chars need to be quoted with standard SQL ident quoting: double quotes where "" is taken as single quote.

"*" acts as fallback database: if the exact name does not exist, its value is taken as connect string for requested database. Such automatically created database entries are cleaned up if they stay idle longer then the time specified in autodb_idle_timeout parameter.

dbname

Destination database name.

Default: same as client-side database name.

host

Hostname or IP address to connect to. Hostnames are resolved on connect time, the result is cached per dns_max_ttl parameter. If DNS returns several results, they are used in round-robin manner.

Default: not set, meaning to use a Unix socket.

port

Default: 5432

user, password

If user= is set, all connections to the destination database will be done with the specified user, meaning that there will be only one pool for this database.

Otherwise pgbouncer tries to log into the destination database with client username, meaning that there will be one pool per user.

auth_user

If auth_user is set, any user not specified in auth_file will be queried from pg_shadow in the database using auth_user. The auth_user password will be taken from auth_file.

Direct access to pg_shadow requires admin rights. It's preferable to use non-admin user that calls SECURITY DEFINER function instead.

pool_size

Set maximum size of pools for this database. If not set, the default_pool_size is used.

connect_query

Query to be executed after a connection is established, but before allowing the connection to be used by any clients. If the query raises errors, they are logged but ignored otherwise.

pool_mode

Set the pool mode specific to this database. If not set, the default pool_mode is used.

max_db_connections

Configure a database-wide maximum (i.e. all pools within the database will not have more than this many server connections).

client_encoding

Ask specific client_encoding from server.

datestyle

Ask specific datestyle from server.

timezone

Ask specific timezone from server.

Section [users]

This contains key=value pairs where key will be taken as a user name and value as a libpq connect-string style list of key=value pairs. As actual libpq is not used, so not all features from libpq can be used.

pool_mode: Set the pool mode to be used for all connections from this user. If not set, the database or default pool_mode is used.

Include Directive

The pgbouncer config file can contain include directives, which specify another configuration file to read and process. This allows for splitting the configuration file into physically separate parts. The include directives look like this:

%include filename

If the file name is not absolute path it is taken as relative to current working directory.

Authentication File Format

pgbouncer needs its own user database. The users are loaded from a text file in following format:

"username1" "password" ...
"username2" "md5abcdef012342345" ...

There should be at least two fields, surrounded by double quotes. The first field is the username and the second is either a plain-text or a MD5-hidden password. pgbouncer ignores the rest of the line.

This file format is equivalent to text files used by PostgreSQL 8.x for authentication info, thus allowing pgbouncer to work directly on PostgreSQL authentication files in data directory.

Since PostgreSQL 9.0, the text files are not used anymore. Thus, the authentication file needs to be generated. See ./etc/mkauth.py for sample script to generate authentication file from pg_shadow table.

Postgres Pro MD5-hidden password format:

"md5" + md5(password + username)

So user admin with password 1234 will have MD5-hidden password md545f2603610af569b6155c45067268c6b.

HBA File Format

It follows the format of Postgres Pro pg_hba.conf file described in Section 21.1.

There are following differences:

Supported record types: local, host, hostssl, hostnossl.
Database field: Supports all, sameuser, @file, multiple names. Not supported: replication, samerole, samegroup.
Username field: Supports all, @file, multiple names. Not supported: +groupname.
Address field: Supported IPv4, IPv6. Not supported: DNS names, domain prefixes.
Auth-method field: Supported methods: trust, reject, md5, password, peer, cert. Not supported: gss, sspi, ident, ldap, radius, pam. Also username map (map=) parameter is not supported.

Example

Minimal config:

[databases]
template1 = host=127.0.0.1 dbname=template1 auth_user=someuser

[pgbouncer]
pool_mode = session
listen_port = 6543
listen_addr = 127.0.0.1
auth_type = md5
auth_file = users.txt
logfile = pgbouncer.log
pidfile = pgbouncer.pid
admin_users = someuser
stats_users = stat_collector

Database defaults:

[databases]

; foodb over Unix socket
foodb =

; redirect bardb to bazdb on localhost
bardb = host=127.0.0.1 dbname=bazdb

; access to destination database will go with single user
forcedb = host=127.0.0.1 port=300 user=baz password=foo client_encoding=UNICODE datestyle=ISO

Example of secure function for auth_query:

CREATE OR REPLACE FUNCTION pgbouncer.user_lookup(in i_username text, out uname text, out phash text)
RETURNS record AS $$
BEGIN
    SELECT usename, passwd FROM pg_catalog.pg_shadow
    WHERE usename = i_username INTO uname, phash;
    RETURN;
END;
$$ LANGUAGE plpgsql SECURITY DEFINER;
REVOKE ALL ON FUNCTION pgbouncer.user_lookup(text) FROM public, pgbouncer;
GRANT EXECUTE ON FUNCTION pgbouncer.user_lookup(text) TO pgbouncer;

Prev	Up	Next
pg_standby	Home	mamonsu

pgbouncer

Synopsis

Description

Quick Start

Note

Options

Note

Note

Note

Admin Console

Show Commands

SHOW STATS;

SHOW SERVERS;

SHOW CLIENTS;

SHOW POOLS;

SHOW LISTS;

SHOW USERS;

SHOW DATABASES;

SHOW FDS;

Note

SHOW CONFIG;

SHOW DNS_HOSTS;

SHOW DNS_ZONES

Process Controlling Commands

PAUSE [db];

DISABLE db;

ENABLE db;

KILL db;

SUSPEND;

RESUME [db];

SHUTDOWN;

RELOAD;

Signals

Libevent Settings

pgbouncer.ini Configuration File

Generic Settings

Log Settings

Console Access Control

Connection Sanity Checks, Timeouts

TLS Settings

Dangerous Timeouts

Low-Level Network Settings

Section [databases]

Section [users]

Include Directive

Authentication File Format

HBA File Format

Example

PAUSE [`db`];

DISABLE `db`;

ENABLE `db`;

KILL `db`;

RESUME [`db`];

`pgbouncer.ini` Configuration File