circuit

[...] since the increase to 64-bit wide busses, using drop-down lists to choose the bit width and selecting bits is tedious, [...]

By @maehne in #617 (comment)

Since we're able to configure the Timekeeper for a Circuit, it would be helpful if the library also allowed mocking the TimeAfterFunc of the reopenCircuitCheck field. https://github.com/cep21/circuit/blob/700836dc9a95756136ce20df20ae5d3f3d8b59fd/v3/closers/hystrix/closer.go#L13-L23

https://github.com/cep21/circuit/blob/700836dc9a95756136ce20df20ae5d3f3d8b59fd/v3/faststats/timedcheck.go#

MCUSim has a separate issue tracker and a wiki located at trac.mcusim.org. You may visit it and list the active tickets by milestone.

There is a separate milestone called Patches Welcome which contains experimental features which could be useful to have. Please, pick up an issue or another [on

The symbolic computation of the admittance between two nodes as a function of the frequency (as well as the transfer function between two ports) is a core functionality of QuCAT, implemented in the core._Network.admittance and core._Network.transfer functions respectively.

However, there is not user-accessible function that would allow one to, for example, plot the impedance (one over the admit

Not sure if it should an enhancement or fix, but I noticed that quantum backpropagation does not work with a GPU register (reg |> cu). It raises "scalar getindex is disallowed" warning. Is there a workaround? GPU operation for expect'(..) can speed up calculations by a lot.