Raspberry Pi

The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:

sip.js(1128): uncompensated = uint16(data[0], data[1]);

Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media

As suggested in #2015:

If there's still not a desire to fix the case sensitivity, maybe it would also help to add to the failed login error message that the user name is case sensitive.

Originally posted by @QuinnDamerell in OctoPrint/OctoPrint#2015 (comment)

Expected Behaviour

Add the build status from GitHub Actions to the set of README badgets

Current Behaviour

I removed it because it was pointing at Travis, which we no

Hello everybody,

first of all thank you for this project.

Introductional words

I uses this project to set up a wlan access point for my parents who have a mobile home and are travelling through europe. That said, I am using the WLAN CLIENT option and ethernet is not used for now.
When there is no Wifi around an additional use case for my parents is to connect to 4G networks via a sma

Blynk library version: master branch at 144a90f3bdb66c3b6c03cce0335c1f1e304d91d6
IDE: VS Code + PlatformIO
IDE version: 1.52.1
Board type: ESP8266
Additional modules: Arduino ESP8266

Scenario, steps to reproduce

Blynk.run() blocks if there is no internet connection on the network and connecting to a local server via SSL.
According to my investigation, `BlynkArduinoClientSecure::conn