uart-protocol

Must-have verilog systemverilog modules

Python package to transfer data in a fast, reliable, and packetized form

Interface Protocol in Verilog

wireless lcd sensor network based on zigbee(cc2530)

Basic UART TX/RX module for FPGA

C SLIP and SlipMux implementation RFC10-55

Wrapper library created to simplify use of SDS011 laser dust sensor in your projects

数据链路层协议，只需要提供单字节的收发函数就可以移植这些协议。Data link layer protocols can be transplanted by providing a single byte transceiver function.

UART bootloader for SAMD10 series

C headers for AVR microcontrollers. Arduino must die!

UART Communication Protocol, support like TCP/UDP feature

Control Electrolux Water Heater via uart

Firmware for a trailing/leading edge MOSFET/BJT/TRIAC dimmer written in C++ including schematics/PCB-layouts

Transmitter and Receiver FPGAs connected using the UART Protocol to execute arithmetic operations and display the inputs on the transmitter's 7 Segment Display as well as the result on the Receiver's 7 Segments Display.

📷 Creates and maps a point cloud of your environment and nearby objects using LIDAR, Arduino, and Unreal Engine 4.

⚾️ Multiplayer Assembly 8086 Clone of BlobbyVolley Game

Serial communacation (USART) on the ATMega 2560 using C++ classes

A short example of MPU6050's DMP processor on BeagleBone Black.

VHDL codes for UART Interface; hardware communication protocol. contains Receiver & Transmitter units & RAM memory.

UART Hobby Project

Door_Locker Two micro-controllers, one acts as a HMI (Human Machine Interface) This micro-controller has a Dio module, LCD Module, Keypad Module and UART Module This one will be used just interfacing with user. The other micro-controller will be responsible for controlling the motor (actuation part) This micro-controller has a Dio module, Timer Module, DC_Motor Module and UART Module This one will be used for just Controlling the motor that will act as the lock for the door. The scenario will be as following: 1- first use Mode: the user will be prompted to enter pass and confirm it using keypad, if passwords are matched the password will be saved to the internal EEPROM of the first micro-controller. If the passwords are not matched it will tell you that the passwords are not matched and ask you to re-enter passwords. 2- Operating Mode: LCD Shows Supported Operations: a- Open the door: If the user choose to open the door he will be prompted to enter the password, if he fails with 4 trials, he will have to wait for 30 seconds to re-enter the password again. if the password is right, a message will be sent to the other micro-controller using uart to open the door. b- Change Password : user must enter the old password first to change. 3- Opening the door: When the message of opening the door will be received at the second micro-controller, it will rotate the motor 0.5 in the clockwise direction. 4- Closing the door: At first micro-controller, a message will be shown: "[1]Close Lock", if the user entered 1 a message will be sent to the other micro-controller to close the door, the second micro-controller will receive the message and rotate motor will rotate 0.5 in the anticlockwise direction. The LCD at the first micro controller will reflect any action / State happens at the system. for example if the door is opening it should show : Lock is opened

This repository is a collection of pair programs between nRF52 (the sender) and STM32F401-Nucleo (the receiver).

This repository contains source code for Arduino and Python interface code to read GPS output (encoded in NMEA) and show latitude and longitude

This repo include creating serial software protocol called BCM protected by checksum and it is done by event base method

linux win serial communication python program

ARM Cortex based STM32 MCU Project. The main purpose of the project is to allow the user assign Mouse and Keyboard Events to the Buttons' or IO Expanders' Trigger Events connected to the MCU. The MCU can be programmed by using KeySim-API program over UART. Moreover, The MCU acts as USB HID Device to send Keyboard and Mouse Reports to PC or CPU.

A platform containing useful peripherals implemented in Chisel that can be attached together to complete the puzzle (SoC).